Main purpose: LCD laser repair machine (referred to as laser machine) on the LCD screen repair industry accounted for the high-end repair technology, is the most high-end LCD screen repair techniques, other than the LCD screen repair industry, in addition to loose solder COF, TAB char ( This failure can be repaired with a binding machine) Others, such as bright line, half line, dotted line, coarse mesh, multi-line laser can be used to repair the machine. Laser machine with high efficiency, repair rate, low cost (the same fault in the laser machine does not require replacement parts, save as yet failed to find parts and repair rate impact), etc. in the LCD screen repair process, is widely large-scale production plant, brand aftermarket repair and maintenance of the company as the main device screen. Main purpose: The purpose of laser repair, is hoping to further correct the defective part, so that the original filter out waste products to be discarded, repair to an acceptable product. You can accept the current product standards, the first is definitely not wired defects; secondly, many products are "no highlights assurance" and therefore could not have been glowing pixels are bright spots, but you can accept some degree few dark spots. Therefore, the object of laser repair, based on the main line defects and highlights. Laser repair method: fusion: the two-story metal overlap across the Department, with appropriate energy and wavelength of the laser can be metalized open and welded together, the two electrodes are attached form had not connected (on and off achieve disconnect) repair.